Rms-technologies IMC17 INTEGRATED MOTOR CONTROLLER/DRIVER Uživatelský manuál Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 23
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
Connecting to the old non-RoHS RS232 card
SP17C pin# SP17C color RS232 card pin#
4 Black/white A (RS485A)
3 Brown B (RS485B)
6 Green - (GND)
1 Red + (PWR)
Table 4
Figure 2
The RS232 card requires power (7-40VDC). Power is then sent to the motor via the Red 4-Pin connector.
Figure 5: Connection using RS232
5. The RS232 converter card connects to the IMC17 using the DB-9 cable that is
provided to you. The red 4-Pin connector is placed onto the converter card.
6. Your power supply will be connected to the RS232 card where the green
header is located. + is for +12-40VDC, - is for the Power Supply
Ground.
7. Connect the RS232 card to your PC with a male to female DB-9 cable.
8. Turn your power supply on and follow instructions for using HyperTerminal.
How to connect with old cable:
If you have a cable with a Red 4-Pin connector, simply cut off this connector,
strip the wires and reconnect to a 3-Pin connector in the following manner:
RMS Technologies Page 21 4/3/2009
IMC17/IMCE17 User Manual Rev 1.06
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23

Komentáře k této Příručce

Žádné komentáře